com.lightstreamer.client

Interface ClientListener

public interface ClientListener

Interface to be implemented to listen to LightstreamerClient events comprehending notifications of connection activity and errors.
Events for these listeners are dispatched by a different thread than the one that generates them. This means that, upon reception of an event, it is possible that the internal state of the client has changed. On the other hand, all the notifications for a single LightstreamerClient, including notifications to ClientListeners, SubscriptionListeners and ClientMessageListeners will be dispatched by the same thread.

Method Summary

Modifier and Type	Method and Description
void	onListenEnd(LightstreamerClient client) Event handler that receives a notification when the ClientListener instance is removed from a LightstreamerClient through LightstreamerClient.removeListener(ClientListener).
void	onListenStart(LightstreamerClient client) Event handler that receives a notification when the ClientListener instance is added to a LightstreamerClient through LightstreamerClient.addListener(ClientListener).
void	onPropertyChange(java.lang.String property) Event handler that receives a notification each time the value of a property of LightstreamerClient.connectionDetails or LightstreamerClient.connectionOptions is changed.
void	onServerError(int errorCode, java.lang.String errorMessage) Event handler that is called when the Server notifies a refusal on the client attempt to open a new connection or the interruption of a streaming connection.
void	onStatusChange(java.lang.String status) Event handler that receives a notification each time the LightstreamerClient status has changed.

Method Detail

onListenEnd

void onListenEnd(@Nonnull
                 LightstreamerClient client)

Event handler that receives a notification when the ClientListener instance is removed from a LightstreamerClient through LightstreamerClient.removeListener(ClientListener). This is the last event to be fired on the listener.

Parameters:

client - the LightstreamerClient this instance was removed from.

onListenStart

void onListenStart(@Nonnull
                   LightstreamerClient client)

Event handler that receives a notification when the ClientListener instance is added to a LightstreamerClient through LightstreamerClient.addListener(ClientListener). This is the first event to be fired on the listener.

Parameters:

client - the LightstreamerClient this instance was added to.

onServerError

void onServerError(int errorCode,
                   @Nonnull
                   java.lang.String errorMessage)

Event handler that is called when the Server notifies a refusal on the client attempt to open a new connection or the interruption of a streaming connection. In both cases, the onStatusChange(java.lang.String) event handler has already been invoked with a "DISCONNECTED" status and no recovery attempt has been performed. By setting a custom handler, however, it is possible to override this and perform custom recovery actions.

Parameters:

errorCode - The error code. It can be one of the following:

• 1 - user/password check failed
• 2 - requested Adapter Set not available
• 7 - licensed maximum number of sessions reached (this can only happen with some licenses)
• 8 - configured maximum number of sessions reached
• 9 - configured maximum server load reached
• 10 - new sessions temporarily blocked
• 11 - streaming is not available because of Server license restrictions (this can only happen with special licenses)
• 30-41 - the current connection or the whole session has been closed by external agents; the possible cause may be:
  • The session was closed by the administrator, through JMX (32) or through a "destroy" request (31);
  • The Metadata Adapter imposes limits on the overall open sessions for the current user and has requested the closure of the current session upon opening of a new session for the same user on a different browser window (35);
  • An unexpected error occurred on the Server while the session was in activity (33, 34);
  • An unknown or unexpected cause; any code different from the ones identified in the above cases could be issued. A detailed description for the specific cause is currently not supplied (i.e. errorMessage is null in this case).
• 60 - this version of the client is not allowed by the current license terms.
• 61 - there was an error in the parsing of the server response thus the client cannot continue with the current session.
• 66 - an unexpected exception was thrown by the Metadata Adapter while authorizing the connection.
• 68 - the Server could not open or continue with the session because of an internal error.
• 71 - this kind of client is not allowed by the current license terms.
• <= 0 - the Metadata Adapter has refused the user connection; the code value is dependent on the specific Metadata Adapter implementation

errorMessage - The description of the error as sent by the Server.

See Also:

onStatusChange(String), ConnectionDetails.setAdapterSet(String)

onStatusChange

void onStatusChange(@Nonnull
                    java.lang.String status)

Event handler that receives a notification each time the LightstreamerClient status has changed. The status changes may be originated either by custom actions (e.g. by calling LightstreamerClient.disconnect()) or by internal actions. The normal cases are the following:

• After issuing connect() when the current status is "DISCONNECTED*", the client will switch to "CONNECTING" first and to "CONNECTED:STREAM-SENSING" as soon as the pre-flight request receives its answer.
  As soon as the new session is established, it will switch to "CONNECTED:WS-STREAMING" if the environment permits WebSockets; otherwise it will switch to "CONNECTED:HTTP-STREAMING" if the environment permits streaming or to "CONNECTED:HTTP-POLLING" as a last resort.
• On the other hand, after issuing connect when the status is already "CONNECTED:*" a switch to "CONNECTING" is usually not needed and the current session is kept.
• After issuing LightstreamerClient.disconnect(), the status will switch to "DISCONNECTED".
• In case of a server connection refusal, the status may switch from "CONNECTING" directly to "DISCONNECTED". After that, the onServerError(int, java.lang.String) event handler will be invoked.

Possible special cases are the following:

• In case of Server unavailability during streaming, the status may switch from "CONNECTED:*-STREAMING" to "STALLED" (see ConnectionOptions.setStalledTimeout(long)). If the unavailability ceases, the status will switch back to "CONNECTED:*-STREAMING"; otherwise, if the unavailability persists (see ConnectionOptions.setReconnectTimeout(long)), the status will switch to "CONNECTING" and eventually to "CONNECTED:*-STREAMING".
• In case the connection or the whole session is forcibly closed by the Server, the status may switch from "CONNECTED:*-STREAMING" or "CONNECTED:*-POLLING" directly to "DISCONNECTED". After that, the onServerError(int, java.lang.String) event handler will be invoked.
• Depending on the setting in ConnectionOptions.setSlowingEnabled(boolean), in case of slow update processing, the status may switch from "CONNECTED:WS-STREAMING" to "CONNECTED:WS-POLLING" or from "CONNECTED:HTTP-STREAMING" to "CONNECTED:HTTP-POLLING".
• If the status is "CONNECTED:*POLLING" and any problem during an intermediate poll occurs, the status may switch to "CONNECTING" and eventually to "CONNECTED:POLLING". The same holds for the "CONNECTED:STREAMING" case, when a rebind is needed.
• In case a forced transport was set through ConnectionOptions.setForcedTransport(String), only the related final status or statuses are possible.
• In case of connection problems, the status may switch from any value to "DISCONNECTED:WILL-RETRY" (see ConnectionOptions.setRetryDelay(long)), then to "CONNECTING" and a new attempt will start. However, in some cases, the client can try to recover the current session; hence, the "DISCONNECTED:TRYING-RECOVERY" status will be used instead of "DISCONNECTED:WILL-RETRY".
• In case of connection problems during a recovery attempt, the status may switch back from "CONNECTING" to "DISCONNECTED:TRYING-RECOVERY" to notify further attempts. If the recovery is no longer possible, the current session will be abandoned and the status will switch to "DISCONNECTED:WILL-RETRY" before the next attempts.

By setting a custom handler it is possible to perform actions related to connection and disconnection occurrences. Note that LightstreamerClient.connect() and LightstreamerClient.disconnect(), as any other method, can be issued directly from within a handler.

Parameters:

status - The new status. It can be one of the following values:

• "CONNECTING" the client has started a connection attempt and is waiting for a Server answer.
• "CONNECTED:STREAM-SENSING" the client received a first response from the server and is now evaluating if a streaming connection is fully functional.
• "CONNECTED:WS-STREAMING" a streaming connection over WebSocket has been established.
• "CONNECTED:HTTP-STREAMING" a streaming connection over HTTP has been established.
• "CONNECTED:WS-POLLING" a polling connection over WebSocket has been started. Note that, unlike polling over HTTP, in this case only one connection is actually opened (see ConnectionOptions.setSlowingEnabled(boolean)).
• "CONNECTED:HTTP-POLLING" a polling connection over HTTP has been started.
• "STALLED" a streaming session has been silent for a while, the status will eventually return to its previous CONNECTED:*-STREAMING status or will switch to "DISCONNECTED:WILL-RETRY".
• "DISCONNECTED:WILL-RETRY" a connection or connection attempt has been closed; a new attempt will be performed after a timeout.
• "DISCONNECTED:TRYING-RECOVERY" a connection has been closed; a new attempt will be performed as soon as possible and, if successful, the underlying session will be kept.
• "DISCONNECTED" a connection or connection attempt has been closed. The client will not connect anymore until a new LightstreamerClient.connect() call is issued.

See Also:

LightstreamerClient.connect(), LightstreamerClient.disconnect(), LightstreamerClient.getStatus()

onPropertyChange

void onPropertyChange(@Nonnull
                      java.lang.String property)

Event handler that receives a notification each time the value of a property of LightstreamerClient.connectionDetails or LightstreamerClient.connectionOptions is changed.
Properties of these objects can be modified by direct calls to them or by server sent events.

Parameters:

property - the name of the changed property.
Possible values are:

• adapterSet
• serverAddress
• user
• password
• serverInstanceAddress
• serverSocketName
• clientIp
• sessionId
• contentLength
• idleTimeout
• keepaliveInterval
• requestedMaxBandwidth
• realMaxBandwidth
• pollingInterval
• reconnectTimeout
• stalledTimeout
• connectTimeout
• currentConnectTimeout
• retryDelay
• firstRetryMaxDelay
• slowingEnabled
• forcedTransport
• serverInstanceAddressIgnored
• reverseHeartbeatInterval
• earlyWSOpenEnabled
• httpExtraHeaders
• httpExtraHeadersOnSessionCreationOnly

See Also:

LightstreamerClient.connectionDetails, LightstreamerClient.connectionOptions