Node.js Client 9.1.0

ClientListener

ClientListener

Interface to be implemented to listen to LightstreamerClient events comprehending notifications of connection activity and errors.
Events for these listeners are executed asynchronously with respect to the code that generates them. This means that, upon reception of an event, it is possible that the current state of the client has changed furtherly.
Note that it is not necessary to implement all of the interface methods for the listener to be successfully passed to the LightstreamerClient#addListener method.

Constructor

new ClientListener()

This is a dummy constructor not to be used in any case.

Methods

onListenEnd()

Event handler that receives a notification when the ClientListener instance is removed from a LightstreamerClient through LightstreamerClient#removeListener. This is the last event to be fired on the listener.

onListenStart()

Event handler that receives a notification when the ClientListener instance is added to a LightstreamerClient through LightstreamerClient#addListener. This is the first event to be fired on the listener.

onPropertyChange(the)

Event handler that receives a notification each time the value of a property of LightstreamerClient#connectionDetails or LightstreamerClient#connectionOptions is changed.

Parameters:
Name Type Description
the String

name of the changed property.
Possible values are:

  • adapterSet
  • serverAddress
  • user
  • password
  • serverInstanceAddress
  • serverSocketName
  • sessionId
  • contentLength
  • idleTimeout
  • keepaliveInterval
  • maxBandwidth
  • pollingInterval
  • reconnectTimeout
  • stalledTimeout
  • retryDelay
  • firstRetryMaxDelay
  • slowingEnabled
  • forcedTransport
  • serverInstanceAddressIgnored
  • cookieHandlingRequired
  • reverseHeartbeatInterval
  • earlyWSOpenEnabled
  • httpExtraHeaders
  • httpExtraHeadersOnSessionCreationOnly
See:

onServerError(errorCode, errorMessage)

Event handler that is called when the Server notifies a refusal on the client attempt to open a new connection or the interruption of a streaming connection. In both cases, the ClientListener#onStatusChange event handler has already been invoked with a "DISCONNECTED" status and no recovery attempt has been performed. By setting a custom handler, however, it is possible to override this and perform custom recovery actions.

Parameters:
Name Type Description
errorCode Number

The error code. It can be one of the following:

  • 1 - user/password check failed
  • 2 - requested Adapter Set not available
  • 7 - licensed maximum number of sessions reached (this can only happen with some licenses)
  • 8 - configured maximum number of sessions reached
  • 9 - configured maximum server load reached
  • 10 - new sessions temporarily blocked
  • 11 - streaming is not available because of Server license restrictions (this can only happen with special licenses)
  • 21 - a bind request has unexpectedly reached a wrong Server instance, which suggests that a routing issue may be in place
  • 30-41 - the current connection or the whole session has been closed by external agents; the possible cause may be:
    • The session was closed on the Server side (via software or by the administrator) (32) or through a client "destroy" request (31);
    • The Metadata Adapter imposes limits on the overall open sessions for the current user and has requested the closure of the current session upon opening of a new session for the same user (35);
    • An unexpected error occurred on the Server while the session was in activity (33, 34);
    • An unknown or unexpected cause; any code different from the ones identified in the above cases could be issued.
    A detailed description for the specific cause is currently not supplied (i.e. errorMessage is null in this case).
  • 60 - this version of the client is not allowed by the current license terms.
  • 61 - there was an error in the parsing of the server response thus the client cannot continue with the current session.
  • 66 - an unexpected exception was thrown by the Metadata Adapter while authorizing the connection.
  • 68 - the Server could not open or continue with the session because of an internal error.
  • 70 - an unusable port was configured on the server address.
  • 71 - this kind of client is not allowed by the current license terms.
  • <= 0 - the Metadata Adapter has refused the user connection; the code value is dependent on the specific Metadata Adapter implementation
errorMessage String

The description of the error as sent by the Server.
See:

onStatusChange(chngStatus)

Event handler that receives a notification each time the LightstreamerClient status has changed. The status changes may be originated either by custom actions (e.g. by calling LightstreamerClient#disconnect) or by internal actions.

The normal cases are the following:

  • After issuing connect(), if the current status is "DISCONNECTED*", the client will switch to "CONNECTING" first and to "CONNECTED:STREAM-SENSING" as soon as the pre-flight request receives its answer.
    As soon as the new session is established, it will switch to "CONNECTED:WS-STREAMING" if the browser/environment permits WebSockets; otherwise it will switch to "CONNECTED:HTTP-STREAMING" if the browser/environment permits streaming or to "CONNECTED:HTTP-POLLING" as a last resort.
    On the other hand if the status is already "CONNECTED:*" a switch to "CONNECTING" is usually not needed.
  • After issuing disconnect(), the status will switch to "DISCONNECTED".
  • In case of a server connection refusal, the status may switch from "CONNECTING" directly to "DISCONNECTED". After that, the ClientListener#onServerError event handler will be invoked.

Possible special cases are the following:
  • In case of Server unavailability during streaming, the status may switch from "CONNECTED:*-STREAMING" to "STALLED" (see ConnectionOptions#setStalledTimeout). If the unavailability ceases, the status will switch back to ""CONNECTED:*-STREAMING""; otherwise, if the unavailability persists (see ConnectionOptions#setReconnectTimeout), the status will switch to "DISCONNECTED:TRYING-RECOVERY" and eventually to "CONNECTED:*-STREAMING".
  • In case the connection or the whole session is forcibly closed by the Server, the status may switch from "CONNECTED:*-STREAMING" or "CONNECTED:*-POLLING" directly to "DISCONNECTED". After that, the ClientListener#onServerError event handler will be invoked.
  • Depending on the setting in ConnectionOptions#setSlowingEnabled, in case of slow update processing, the status may switch from "CONNECTED:WS-STREAMING" to "CONNECTED:WS-POLLING" or from "CONNECTED:HTTP-STREAMING" to "CONNECTED:HTTP-POLLING".
  • If the status is "CONNECTED:*-POLLING" and any problem during an intermediate poll occurs, the status may switch to "CONNECTING" and eventually to "CONNECTED:*-POLLING". The same may hold for the "CONNECTED:*-STREAMING" case, when a rebind is needed.
  • In case a forced transport was set through ConnectionOptions#setForcedTransport, only the related final status or statuses are possible. Note that if the transport is forced while a Session is active and this requires a reconnection, the status may do a preliminary switch to CONNECTED:STREAM-SENSING.
  • In case of connection problems, the status may switch from any value to "DISCONNECTED:WILL-RETRY" (see ConnectionOptions#setRetryDelay), then to "CONNECTING" and a new attempt will start. However, in most cases, the client will try to recover the current session; hence, the "DISCONNECTED:TRYING-RECOVERY" status will be entered and the recovery attempt will start.
  • In case of connection problems during a recovery attempt, the status may stay in "DISCONNECTED:TRYING-RECOVERY" for long time, while further attempts are made. On the other hand, if the connection is successful, the status will do a preliminary switch to CONNECTED:STREAM-SENSING. If the recovery is finally unsuccessful, the current session will be abandoned and the status will switch to "DISCONNECTED:WILL-RETRY" before the next attempts.


By setting a custom handler it is possible to perform actions related to connection and disconnection occurrences. Note that LightstreamerClient#connect and LightstreamerClient#disconnect, as any other method, can be issued directly from within a handler.

Parameters:
Name Type Description
chngStatus String

The new status. It can be one of the following values:

  • "CONNECTING" the client has started a connection attempt and is waiting for a Server answer.
  • "CONNECTED:STREAM-SENSING" the client received a first response from the server and is now evaluating if a streaming connection is fully functional.
  • "CONNECTED:WS-STREAMING" a streaming connection over WebSocket has been established.
  • "CONNECTED:HTTP-STREAMING" a streaming connection over HTTP has been established.
  • "CONNECTED:WS-POLLING" a polling connection over WebSocket has been started. Note that, unlike polling over HTTP, in this case only one connection is actually opened (see ConnectionOptions#setSlowingEnabled).
  • "CONNECTED:HTTP-POLLING" a polling connection over HTTP has been started.
  • "STALLED" a streaming session has been silent for a while, the status will eventually return to its previous CONNECTED:*-STREAMING status or will switch to "DISCONNECTED:WILL-RETRY" / "DISCONNECTED:TRYING-RECOVERY".
  • "DISCONNECTED:WILL-RETRY" a connection or connection attempt has been closed; a new attempt will be performed (possibly after a timeout).
  • "DISCONNECTED:TRYING-RECOVERY" a connection has been closed and the client has started a connection attempt and is waiting for a Server answer; if successful, the underlying session will be kept.
  • "DISCONNECTED" a connection or connection attempt has been closed. The client will not connect anymore until a new LightstreamerClient#connect call is issued.
See: