ConnectionOptions

Inquiry method that gets the length expressed in bytes to be used by the Server for the response body on a HTTP stream connection.

Inquiry method that gets the maximum time to wait before trying a new connection to the Server in case the previous one is unexpectedly closed while correctly working.

Inquiry method that gets the value of the forced transport (if any).

Inquiry method that gets the JSON object containing the extra headers to be sent to the server.

Inquiry method that gets the maximum time the Server is allowed to wait for any data to be sent in response to a polling request, if none has accumulated at request time. The wait time used by the Server, however, may be different, because of server side restrictions.

Inquiry method that gets the interval between two keepalive packets sent by Lightstreamer Server on a stream connection when no actual data is being transmitted.
If the value has just been set and a connection to Lightstreamer Server has not been established yet, the returned value is the time that is being requested to the Server. Afterwards, the returned value is the time used by the Server, that may be different, because of Server side constraints. If the returned value is 0, it means that the interval is to be decided by the Server upon the next connection.

Inquiry method that gets the polling interval used for polling connections.
If the value has just been set and a polling request to Lightstreamer Server has not been performed yet, the returned value is the polling interval that is being requested to the Server. Afterwards, the returned value is the the time between subsequent polling requests that is really allowed by the Server, that may be different, because of Server side constraints.

Inquiry method that gets the maximum bandwidth that can be consumed for the data coming from Lightstreamer Server. This is the actual maximum bandwidth, in contrast with the requested maximum bandwidth, returned by ConnectionOptions#getRequestedMaxBandwidth.
The value may differ from the requested one because of restrictions operated on the server side, or because bandwidth management is not supported (in this case it is always "unlimited"), but also because of number rounding.

Lifecycle:If a connection to Lightstreamer Server is not currently active, null is returned; soon after the connection is established, the value becomes available, as notified by a call to ClientListener#onPropertyChange with argument "realMaxBandwidth".

Inquiry method that gets the time the client, after entering "STALLED" status, is allowed to keep waiting for a keepalive packet or any data on a stream connection, before disconnecting and trying to reconnect to the Server.

Inquiry method that gets the maximum bandwidth that can be consumed for the data coming from Lightstreamer Server, as requested for this session. The maximum bandwidth limit really applied by the Server on the session is provided by ConnectionOptions#getRealMaxBandwidth

Inquiry method that gets the minimum time to wait before trying a new connection to the Server in case the previous one failed for any reason, which is also the maximum time to wait for a response to a request before dropping the connection and trying with a different approach. Note that the delay is calculated from the moment the effort to create a connection is made, not from the moment the failure is detected or the connection timeout expires.

Inquiry method that gets the reverse-heartbeat interval expressed in milliseconds. A 0 value is possible, meaning that the mechanism is disabled.

Inquiry method that gets the maximum time allowed for attempts to recover the current session upon an interruption, after which a new session will be created. A 0 value also means that any attempt to recover the current session is prevented in the first place.

Inquiry method that gets the extra time the client can wait when an expected keepalive packet has not been received on a stream connection (and no actual data has arrived), before entering the "STALLED" status.

Inquiry method that checks if the client is going to connect only if it can guarantee that cookies pertaining to the server will be sent.

Inquiry method that checks if the restriction on the forwarding of the configured extra http headers applies or not.

Inquiry method that checks if the client is going to ignore the server instance address that will possibly be sent by the server.

Inquiry method that checks if the slowing algorithm is enabled or not.

Setter method that sets the length in bytes to be used by the Server for the response body on a stream connection (a minimum length, however, is ensured by the server). After the content length exhaustion, the connection will be closed and a new bind connection will be automatically reopened.
NOTE that this setting only applies to the "HTTP-STREAMING" case (i.e. not to WebSockets).

Default value: A length decided by the library, to ensure the best performance. It can be of a few MB or much higher, depending on the environment.

Lifecycle: The content length should be set before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next streaming connection (either a bind or a brand new session).

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "contentLength" on any ClientListener .

Setter method that enables/disables the cookies-are-required policy on the client side. Enabling this policy will guarantee that cookies pertaining to the Lightstreamer Server will be sent with each request.
This holds only for cookies returned by the Server (possibly affinity cookies inserted by a Load Balancer standing in between). If other cookies received by the application also pertain to Lightstreamer Server host, they must be manually set through the static LightstreamerClient.addCookies method. Likewise, cookies set by Lightstreamer Server and also pertaining to other hosts accessed by the application must be manually extracted through the static LightstreamerClient.getCookies method and handled properly.
On the other hand enabling this setting may prevent the client from opening a streaming connection or even to connect at all depending on the browser/environment.

Default value: false.

Lifecycle:This setting should be performed before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next HTTP request or WebSocket establishment.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "cookieHandlingRequired" on any ClientListener.

Setter method that sets the maximum time to wait before trying a new connection to the Server in case the previous one is unexpectedly closed while correctly working. The new connection may be either the opening of a new session or an attempt to recovery the current session, depending on the kind of interruption.
The actual delay is a randomized value between 0 and this value. This randomization might help avoid a load spike on the cluster due to simultaneous reconnections, should one of the active servers be stopped. Note that this delay is only applied before the first reconnection: should such reconnection fail, only the setting of ConnectionOptions#setRetryDelay will be applied.

Default value: 100 (0.1 seconds).

Lifecycle: This value can be set and changed at any time.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "firstRetryMaxDelay" on any ClientListener .

Setter method that can be used to disable/enable the Stream-Sense algorithm and to force the client to use a fixed transport or a fixed combination of a transport and a connection type. When a combination is specified the Stream-Sense algorithm is completely disabled.
The method can be used to switch between streaming and polling connection types and between HTTP and WebSocket transports.
In some cases, the requested status may not be reached, because of connection or environment problems. In that case the client will continuously attempt to reach the configured status.
Note that if the Stream-Sense algorithm is disabled, the client may still enter the "CONNECTED:STREAM-SENSING" status; however, in that case, if it eventually finds out that streaming is not possible, no recovery will be tried.

Default value: null (full Stream-Sense enabled).

Lifecycle:This method can be called at any time. If called while the client is connecting or connected it will instruct to switch connection type to match the given configuration.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "forcedTransport" on any ClientListener .

Setter method that enables/disables the setting of extra HTTP headers to all the request performed to the Lightstreamer server by the client.
Also note that if the browser/environment does not have the possibility to send extra headers while some are specified through this method it will fail to connect. Also note that the Content-Type header is reserved by the client library itself, while other headers might be refused by the browser/environment and others might cause the connection to the server to fail.
For instance, you cannot use this method to specify custom cookies to be sent to Lightstreamer Server. Use the static LightstreamerClient.addCookies instead (and LightstreamerClient.getCookies for inquiries).
The use of custom headers might also cause the browser/environment to send an OPTIONS request to the server before opening the actual connection.

Default value: null (meaning no extra headers are sent).

Lifecycle:This setting should be performed before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next HTTP request or WebSocket establishment.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "httpExtraHeaders" on any ClientListener .

Setter method that enables/disables a restriction on the forwarding of the extra http headers specified through ConnectionOptions#setHttpExtraHeaders. If true, said headers will only be sent during the session creation process (and thus will still be available to the Metadata Adapter notifyUser method) but will not be sent on following requests. On the contrary, when set to false, the specified extra headers will be sent to the server on every request .

Default value: false.

Lifecycle:This setting should be performed before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next HTTP request or WebSocket establishment.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "httpExtraHeadersOnSessionCreationOnly" on any ClientListener .

Setter method that sets the maximum time the Server is allowed to wait for any data to be sent in response to a polling request, if none has accumulated at request time. Setting this time to a nonzero value and the polling interval to zero leads to an "asynchronous polling" behaviour, which, on low data rates, is very similar to the streaming case. Setting this time to zero and the polling interval to a nonzero value, on the other hand, leads to a classical "synchronous polling".
Note that the Server may, in some cases, delay the answer for more than the supplied time, to protect itself against a high polling rate or because of bandwidth restrictions. Also, the Server may impose an upper limit on the wait time, in order to be able to check for client-side connection drops.

Default value: 19000 (19 seconds).

Lifecycle: The idle timeout should be set before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next polling request.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "idleTimeout" on any ClientListener .

Setter method that sets the interval between two keepalive packets to be sent by Lightstreamer Server on a stream connection when no actual data is being transmitted. The Server may, however, impose a lower limit on the keepalive interval, in order to protect itself. Also, the Server may impose an upper limit on the keepalive interval, in order to be able to check for client-side connection drops. If 0 is specified, the interval will be decided by the Server.

Default value: 0 (meaning that the Server will send keepalive packets based on its own configuration).

Lifecycle: The keepalive interval should be set before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next streaming connection (either a bind or a brand new session).
Note that, after a connection, the value may be changed to the one imposed by the Server.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "keepaliveInterval" on any ClientListener .

Setter method that sets the polling interval used for polling connections. The client switches from the default streaming mode to polling mode when the client network infrastructure does not allow streaming. Also, polling mode can be forced by calling ConnectionOptions#setForcedTransport with "WS-POLLING" or "HTTP-POLLING" as parameter.
The polling interval affects the rate at which polling requests are issued. It is the time between the start of a polling request and the start of the next request. However, if the polling interval expires before the first polling request has returned, then the second polling request is delayed. This may happen, for instance, when the Server delays the answer because of the idle timeout setting. In any case, the polling interval allows for setting an upper limit on the polling frequency.
The Server does not impose a lower limit on the client polling interval. However, in some cases, it may protect itself against a high polling rate by delaying its answer. Network limitations and configured bandwidth limits may also lower the polling rate, despite of the client polling interval.
The Server may, however, impose an upper limit on the polling interval, in order to be able to promptly detect terminated polling request sequences and discard related session information.

Default value: 0 (pure "asynchronous polling" is configured).

Lifecycle:The polling interval should be set before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next polling request.
Note that, after each polling request, the value may be changed to the one imposed by the Server.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "pollingInterval" on any ClientListener

Setter method that sets the time the client, after entering "STALLED" status, is allowed to keep waiting for a keepalive packet or any data on a stream connection, before disconnecting and trying to reconnect to the Server. The new connection may be either the opening of a new session or an attempt to recovery the current session, depending on the kind of interruption.

Default value: 3000 (3 seconds).

Lifecycle: This value can be set and changed at any time.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "reconnectTimeout" on any ClientListener .

Setter method that sets the maximum bandwidth expressed in kilobits/s that can be consumed for the data coming from Lightstreamer Server. A limit on bandwidth may already be posed by the Metadata Adapter, but the client can furtherly restrict this limit. The limit applies to the bytes received in each streaming or polling connection.

Edition Note: Bandwidth Control is an optional feature, available depending on Edition and License Type. To know what features are enabled by your license, please see the License tab of the Monitoring Dashboard (by default, available at /dashboard).

Default value: "unlimited".

Lifecycle: The bandwidth limit can be set and changed at any time. If a connection is currently active, the bandwidth limit for the connection is changed on the fly. Remember that the Server may apply a different limit.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "requestedMaxBandwidth" on any ClientListener .
Moreover, upon any change or attempt to change the limit, the Server will notify the client and such notification will be received through a call to ClientListener#onPropertyChange with argument "realMaxBandwidth" on any ClientListener .

Setter method that sets

1. the minimum time to wait before trying a new connection to the Server in case the previous one failed for any reason; and
2. the maximum time to wait for a response to a request before dropping the connection and trying with a different approach.

Enforcing a delay between reconnections prevents strict loops of connection attempts when these attempts always fail immediately because of some persisting issue. This applies both to reconnections aimed at opening a new session and to reconnections aimed at attempting a recovery of the current session.
Note that the delay is calculated from the moment the effort to create a connection is made, not from the moment the failure is detected. As a consequence, when a working connection is interrupted, this timeout is usually already consumed and the new attempt can be immediate (except that ConnectionOptions#setFirstRetryMaxDelay will apply in this case). As another consequence, when a connection attempt gets no answer and times out, the new attempt will be immediate.

As a timeout on unresponsive connections, it is applied in these cases:

• Streaming: Applied on any attempt to setup the streaming connection. If after the timeout no data has arrived on the stream connection, the client may automatically switch transport or may resort to a polling connection.
• Polling and pre-flight requests: Applied on every connection. If after the timeout no data has arrived on the polling connection, the entire connection process restarts from scratch.

This setting imposes only a minimum delay. In order to avoid network congestion, the library may use a longer delay if the issue preventing the establishment of a session persists.

Default value: 4000 (4 seconds).

Lifecycle: This value can be set and changed at any time.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "retryDelay" on any ClientListener .

Setter method that enables/disables the reverse-heartbeat mechanism by setting the heartbeat interval. If the given value (expressed in milliseconds) equals 0 then the reverse-heartbeat mechanism will be disabled; otherwise if the given value is greater than 0 the mechanism
will be enabled with the specified interval.
When the mechanism is active, the client will ensure that there is at most the specified interval between a control request and the following one, by sending empty control requests (the "reverse heartbeats") if necessary.
This can serve various purposes:

• Preventing the communication infrastructure from closing an inactive socket that is ready for reuse for more HTTP control requests, to avoid connection reestablishment overhead. However it is not guaranteed that the connection will be kept open, as the underlying TCP implementation may open a new socket each time a HTTP request needs to be sent.
  Note that this will be done only when a session is in place.
• Allowing the Server to detect when a streaming connection or Websocket is interrupted but not closed. In these cases, the client eventually closes the connection, but the Server cannot see that (the connection remains "half-open") and just keeps trying to write. This is done by notifying the timeout to the Server upon each streaming request. For long polling, the ConnectionOptions#setIdleTimeout setting has a similar function.
• Allowing the Server to detect cases in which the client has closed a connection in HTTP streaming, but the socket is kept open by some intermediate node, which keeps consuming the response. This is also done by notifying the timeout to the Server upon each streaming request, whereas, for long polling, the ConnectionOptions#setIdleTimeout setting has a similar function.

Default value: 0 (meaning that the mechanism is disabled).

Lifecycle: This setting should be performed before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the setting will be obeyed immediately, unless a higher heartbeat frequency was notified to the Server for the current connection. The setting will always be obeyed upon the next connection (either a bind or a brand new session).

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "reverseHeartbeatInterval" on any ClientListener .

Setter method that can be used to disable/enable the automatic handling of server instance address that may be returned by the Lightstreamer server during session creation.
In fact, when a Server cluster is in place, the Server address specified through ConnectionDetails#setServerAddress can identify various Server instances; in order to ensure that all requests related to a session are issued to the same Server instance, the Server can answer to the session opening request by providing an address which uniquely identifies its own instance.
Setting this value to true permits to ignore that address and to always connect through the address supplied in setServerAddress. This may be needed in a test environment, if the Server address specified is actually a local address to a specific Server instance in the cluster.

Edition Note: Server Clustering is an optional feature, available depending on Edition and License Type. To know what features are enabled by your license, please see the License tab of the Monitoring Dashboard (by default, available at /dashboard).

Default value: false.

Lifecycle:This method can be called at any time. If called while connected, it will be applied when the next session creation request is issued.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "serverInstanceAddressIgnored" on any ClientListener .

Setter method that sets the maximum time allowed for attempts to recover the current session upon an interruption, after which a new session will be created. If the given value (expressed in milliseconds) equals 0, then any attempt to recover the current session will be prevented in the first place.
In fact, in an attempt to recover the current session, the client will periodically try to access the Server at the address related with the current session. In some cases, this timeout, by enforcing a fresh connection attempt, may prevent an infinite sequence of unsuccessful attempts to access the Server.
Note that, when the Server is reached, the recovery may fail due to a Server side timeout on the retention of the session and the updates sent. In that case, a new session will be created anyway. A setting smaller than the Server timeouts may prevent such useless failures, but, if too small, it may also prevent successful recovery in some cases.

Default value: 15000 (15 seconds).

Lifecycle: This value can be set and changed at any time.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "sessionRecoveryTimeout" on any ClientListener .

Setter method that turns on or off the slowing algorithm. This heuristic algorithm tries to detect when the client CPU is not able to keep the pace of the events sent by the Server on a streaming connection. In that case, an automatic transition to polling is performed.
In polling, the client handles all the data before issuing the next poll, hence a slow client would just delay the polls, while the Server accumulates and merges the events and ensures that no obsolete data is sent.
Only in very slow clients, the next polling request may be so much delayed that the Server disposes the session first, because of its protection timeouts. In this case, a request for a fresh session will be reissued by the client and this may happen in cycle.

Default value: false.

Lifecycle:This setting should be performed before calling the LightstreamerClient#connect method. However, the value can be changed at any time: the supplied value will be used for the next streaming connection (either a bind or a brand new session).

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "slowingEnabled" on any ClientListener .

Setter method that sets the extra time the client is allowed to wait when an expected keepalive packet has not been received on a stream connection (and no actual data has arrived), before entering the "STALLED" status.

Default value: 2000 (2 seconds).

Lifecycle: This value can be set and changed at any time.

Notification: A change to this setting will be notified through a call to ClientListener#onPropertyChange with argument "stalledTimeout" on any ClientListener .